The P410m is the first Micron SAS SSD to leverage the company’s 25nm MLC NAND flash technology and Micron’s Extended Performance and Enhanced Reliability Technology (XPERT) platform. The P410m is shares most of its architecture with Micron’s P400m, a 2.5-inch 7mm SATA SSD that that proved itself a competent mainstream enterprise SSD in StorageReview’s recent benchmarks.
The P410m is the first Micron SAS SSD to leverage the company’s 25nm MLC NAND flash technology and Micron’s Extended Performance and Enhanced Reliability Technology (XPERT) platform. The P410m is shares most of its architecture with Micron’s P400m, a 2.5-inch 7mm SATA SSD that that proved itself a competent mainstream enterprise SSD in StorageReview’s recent benchmarks.
By using the same internals as the P400m plus an added Emulex SATA-to-SAS bridge, the new P410m represents a low-cost entry point for Micron in the SAS SSD market, where the SAS interface provides Micron with an SSD solution that fits into dual-port enterprise architectures. There are many applications where low-cost SSD storage can provide a tangible improvement in the data center for power consumption, cooling requirements, and performance, including persistent storage applications. Manufacturing, testing, and qualification for the P410m is completed solely at Micron facilities.
Micron RealSSD P410m Specifications:
- Interface: 6 Gb/s SAS
- Micron 25nm MLC NAND Flash
- Marvell 9187 SATA 6.0Gb/s Controller
- Capacities
- 100GB (MTFDEAK100MAS-1S1AA)
- Sequential 64KB read: 410MB/s
- Sequential 64KB write: 235 MB/s
- Random 4KB read: 50,000 IOPS
- Random 4KB write: 20,000 IOPS
- 200GB (MTFDEAK200MAS-1S1AA)
- Sequential 64KB read: 410 MB/s
- Sequential 64KB write: 345 MB/s
- Random 4KB read: 50,000 IOPS
- Random 4KB write: 30,000 IOPS
- 400GB (MTFDEAK400MAS-1S1AA)
- Sequential 64KB read: 410 MB/s
- Sequential 64KB write: 345 MB/s
- Random 4KB read: 50,000 IOPS
- Random 4KB write: 30,000 IOPS
- 100GB (MTFDEAK100MAS-1S1AA)
- Endurance
- 10 fills/day for 5 years
- Up to 7PB total bytes written
- Onboard power loss protection
- Power consumption: <9W (TYP)
- Operating Temp: Commercial 0°C to 70°C
- 2.5-inch drive: 100.5mm x 69.85mm x 7.0mm
Availability
The drive is currently in production and is available to OEMs and through Micron’s sales and distribution channels.
